Back   Printable version
Click on the photos:

RESCHEDULED - NEW DATE - Kenneth Lee & Sons, Inc. Farm & Ranch Equipment Absolute Retirement Auction
Saturday, April 21, 2018 - 9:00 AM (MT)
Auction Location: Hereford, SD







NEW DATE - SATURDAY, APRIL 21, 2018 - 9:00 AM

Saturday, April 14, 2018 - 9:00 AM

AUCTION LOCATION: 15870 209TH Place, Sturgis, SD (Hereford).
From Sturgis, SD: At the Jct. of Hwys. 34/79, 27.5 E on Hwy 34 to Hereford Rd, 1-S, 1-E, 7-S to Alkali Rd., then 1-E to Wurnig Rd, then 1-S, then 1-E on 209th Pl. to the farm.
From New Underwood, SD: At I-90 Exit 78 (NU Exit), North 20 mi. on New Underwood Rd to Alkali Rd. then 3-W to Wurnig Rd, then 1-S, then 1-E on 209th Pl. Signs will be posted.

2009 AGCO Gleaner R76 combine “Fieldstar II”, SN: R76-HUT7137, 1699 eng. hr., 1393 sep. hr., tires: 800-70R38 front duals – 600-65R28 rear, lateral tilt, exc. field-ready cond; 1996 Gallenberg Equipment “Aire Glide 1000XT” crop sprayer, 120’ booms, 1,000 gal. poly tank, centerline light bar, guidance system, 3389 hrs., SN: 2196, A-1; 1997 Willmar Eagle 8400 sprayer, 1,000 gal. SS tank, 120’ booms, centerline light bar, very good; 1984 Ag-Chem Terra Gator 1603T sprayer, 1,500 gal. tank, booms, centerline light bar, good cond.; Simonsen 7-ton dry fertilizer spreader, Model N-74HFBR-21, 50’ spread, SN: 879N9234; Mobility 500 fertilizer spreader, 50’ spread; 1992 JD 8960 tractor, 370 HP, 4WD, duals, 4 outlets, 7,900 hrs., SN: RW8960H004444, VG cond.; 1990 Case IH 9170 tractor, 335 HP, 4WD, duals, 4 outlets, VG rubber. 11,628 hrs., SN: JCB0005134; 1988 CAT Challenger 65 track-mounted tractor, 270 HP, rear PTO, 3-pt. w/Cat. III quick hitch. 10,908 hr. SN: 7YC00691, A-1; 1979 JD 8640 tractor, 4WD, 275 HP, duals, 3 pt., 1,000 PTO, 12,000-plus hours, SN: 8640H001682R, good; JD 4240 tractor, cab, 3 pt. 3 outlets, dual PTO, w/mtd. JD 158 loader w/bucket & grapple. SN: 4240H003572R; 1980 Case 2290 tractor, 3 pt., PTO, 3 outlets, hrs. unknown, SN: 9925582, good; Kubota 3830 tractor, power shift, 3 pt., sgl. outlet, power shift w/mtd. Kubota LA723 loader w/bucket. SN: 339292, nice unit; IHC 464 utility tractor, 45 HP, gas, 3 pt., PTO, sgl. outlet. SN: 2210160U107493, VG; IHC B414 gas utility tractor, 3 pt. SN: 3066, good; 1954 Allis-Chalmers WD-45 tractor, WF, runs; IHC M Farmall WF tractor, runs; MF 1500 tractor, 4x4, sitting for quite some time…has a good mtd. 10’ angle blade.

(2) Amber Waves 2,800 bu. hopper-bottom bins, near new; Brent 976 grain cart, as new; Walinga “Agri-Vac” grain vac w/pipe; Case IH Model 8230 - 30’ draper pull-type swather (VG canvas). SN: CFH0066693, exc.; Mac Don 962 36’ Draper Harvest Header mounted on KB (Killbros) transport, VG cond.; Deutz-Allis combine header; Agco Gleaner 8 row corn combine head, SN: 083020124 on B&B header trailer, SN: 140823; Agco Gleaner pickup head w/Melroe 388 pickup attach. & transport. SN: NP01127H; Westfield MK 100-71 grain auger, 10”x71’ w/swing hopper; Westfield MK 100-61 grain auger, 10”x61’ w/swing hopper; Westfield WR80-51 grain auger, 8”x51’; 1983 Farm King 7”x51’ grain auger; Westfield J-207-31 (7”x31’) grain auger w/gas engine drive; (2) 4” augers w/elec. motors; Wheatheart hopper unloader w/Honda gas engine, good; Wheatheart hydraulic drag, good; (6) grain bin jacks.

Flexicoil 39’ air drill, 12” space w/2340 cart, A-1; Concord 4010 air drill, set up for 30” rows & shanks to setup all 10” w/2000 Concord air tank; 1989 Concord 40’ air drill w/12” spacing, SN: 8F70465, includes 2000 Air Cart 200 bu. air tank; JD 7000 8-row corn planter; JD 610 40’ chisel plow, 15” space; Sunflower 22’ offset disk; Morris CP-731 (31’) chisel plow w/mulchers; IHC Model 490 28’ tandem disk; Sunflower 14’ offset disk; Miller 20’ offset disk.

1989 Peterbilt 377 conv. truck, tandems w/tag axle, CAT engine w/18-sp. trans., full air ride w/mtd. 20’ Rugby box w/tarp & hoist, nice: 1989 Peterbilt 379 conv. truck, day cab, B CAT motor w/18-sp. Eaton Fuller trans., wet kit, good; 1980 Peterbilt 379 conv. truck, 3406 CAT motor, good unit; 1976 Peterbilt 359 conv. truck (extended hood), 3406B Model 400HP motor, 13-sp. trans., frame repaired, tires fair, includes mtd. 3,000 gal. stainless steel tank; 2004 Dodge one ton 4x2 pickup, 5.7L V8 Hemi Magnum, man. trans., straight cab, 111k mi. , nice; 1988 Ford F-350 Custom diesel farm truck, 16,000 GVW w/mtd. utility box & mtd. Honda GX 240 Puma portable air compressor; 2002 Dodge 4x2 pickup, w/mounted Stahl utility box w/portable Puma air compressor & fuel tank w/pump. 152,142 mi.; 2000 Chev. 4x4 straight-cab pickup, clean w/112,030 mi.; 1988 Dodge Dakota 4x4 ranch pickup, V6, man. 179k mi.; 1963 Chev. C-60 farm truck, 327 V-8, 2-sp. axle w/mtd. 16’ steel straight box w/hoist, good; 1963 Chev. farm truck w/mtd. Kory gravity feed box; 1988 Wilson Pace Setter DWH-200 43’ dbl. hopper grain transport trailer, needs tarp repair; 1986 Timpte 42’ hopper-bottom grain trailer w/RO tarp; Tempte flatbed 40’ semi trailer w/(4) mtd. 1500 gal. poly tanks & pump, SN: 9671;  tandem dual semi dolly; sgl. axle semi dolly; Custom-made sprayer transport w/pump & motor; 2008 Delta 26’ gooseneck flatbed trailer, tandem duals w/beaver tail & flip-over ramps, as new; 2013 Wesco 22’ tilt-bed trailer, like new; DCT tandem axle car trailer; (2) 20’ GN shop-built flatbed tandem axle trailers.

NEW DATE - SATURDAY, APRIL 21, 2018 - 9:00 AM

Bobcat S185 Turbo skidsteer, remotes, enc. cab, 1953 hours, SN: 5250181142 w/bucket, A-1; 610 Bobcat skidsteer, runs fine, SN: 203227; SKIDSTEER ATTACH: (2) sets of pallet forks, cement mixer w/ skidsteer attachment, Cheyenne Tool 600 snow blower, Bobcat 15C post hole digger w/9” & 12” bits, and a Tomahawk 72” rock bucket w/grapple (near new), trailer mover, shop-built post puller, Farmhand hay sweep w/skidsteer plate; Olympian D50P2S standby generator, 50 KW, on transport. 1253 hrs. with internal fuel tank on transport. SN: OLY00000HNPF00929, like new; IHC 515 wheel loader, 7224 hrs., SN: 6238, good unit; Massey Ferguson 204 all-terrain forklift w/sgl. stage mast, good; Allis-Chalmers 918 loader/backhoe, 30” bucket, no welds, good farm/ranch unit, SN: 9185370; CAT No. 12 motor grader, front scarifier, SN-A00004692, good unit.

2010 Polaris 400 Ranger side-by-side UTV, 447 hrs., A-1; 2005 Honda 4x2 ATV; 1992 Honda 300 4x4 ATV; (3) Honda motorcycles; 80S, 125 & a GT750; Husqvarna RZ5424 zero-turn riding mower, 24 HP, 54” cut, 232 hr.; Dixon zero-turn riding mower; Keen Kutter 7’ rotary mower, 3 pt.; American Farmhand 3-pt., 6’ rotary mower; IHC 300 3-pt. 8’ rear blade; Common Sense Mfg. hydraulic wire roller; lg. truck V-plow; snowmobile/ATV trailer.

2,000 gal. fuel tank w/110v Fill Rite pump, all in concrete containment; (2) 560 gal. fuel tanks w/Fill Rite 110v pumps, in containment; 300 gal. fuel tank on transport w/pump & gas engine; 500 gal. propane tank; 250 gal. propane tank; 110 gal. rd. propane tank; propane fill hose; Pull-type sprayer w/150 gal. tank with 12’ boom & nozzle; Pull-type sprayer, 55 gal. tank w/ gas motor; other items.

Black Max 8750 portable generator w/Honda engine, like new; Lincoln Ranger 8 (8,000 watt) AC-DC welder generator w/Kohler Command 20 HP gas engine, ONLY 101.5 hours; Millermatic 250 wire feed welder on cart; welding helmets; Set of Smith gauges, torches, hose & cart; Century 230/140 amp AC/DC welder; welding rod; 4x6 iron welding bench w/6” vise; (2) multi-drawer Craftsman top & bottom tool chest, both FULL of mechanics tools, sockets, wrenches, screwdrivers, etc…all American; Magna Force 6.5 HP 2-stage upright air compressor; new & used air hose; air hose reels; Lg. CP 1” air impact; (3) 3/4'” air impacts; other impact tools and air tools; Craftsman 9” radial arm saw; Ace 10” band saw; rock saw; Delta miter saw on stand; Rockwell 10” table saw on stand; 14” metal chop saw; bench grinders; many sm. elec. hand tools; (3) Stihl & Poulan chainsaws, near new; lots of cordless tools…grease guns, drills, related; Continental 60,000 lb. shop press; Craftsman 20” floor model drill press; Mini Brute port. drill/mill w/oiler & multiple bits; many sm. to lg. gear pullers; (1) sm & (1) lg. port-a-power; near new parts washer; Strong, Carlisle & Hammond 8’ metal lathe w/all attach.; 4’ metal lathe w/tools; 4’ wood lathe w/tools; CST/Berger transit w/tripod 7 stick; Simpson 4,000 psi gas pressure washer; Timberline HD wood burning stove; Craftsman 6.75 gas weed eater; hyd. jacks; log chains; chain boomers; truck straps & binders; new 12v fuel pump; 2 ton shop crane; lg. rollaround shop A-frame w/Yale 1 ton chain hoist; (2) 3.5 ton hyd. floor jacks; Cherry Bomb upright air floor jack; transmission jack; HD shop creeper; many good (some new) truck tires with wheels, 10.00x22 & 24.5; new 380/90R46 sprayer tire; truck & tractor chains, various sizes; pickup stock rack; 4’, 6’, 8’, 12’ Keller fiberglas step ladders; many ext. cords; lots of concrete form stakes; full pallet of pre-mix concrete; partial pallet of concrete sand mix; set of scaffold;  LOTS of nuts, bolts, hardware, equipment supplies and parts, gate hinges to lug nuts, etc., filters, paints, etc.; lots of welding & scrap iron; Play Mate paddle boat w/cushions and many unlisted items.

NEW DATE - SATURDAY, APRIL 21, 2018 - 9:00 AM

CONTACTS: Kenny Lee (605) 515-0040 – Martin Jurisch 484-1353

NOTE: The majority of this excellent used equipment has always been shedded with all being in field-ready condition and with all having had regular maintenance. The Lee family were excellent farmers for nearly 50 years and this equipment reflects their strict attention to detail and care. Please note - The farm is sold and buyers will have until May 1, 2018 ONLY to remove purchases. No exceptions. Load-out assistance on site. This is a large auction with many individual items, so bring a partner as we may be selling in 2 sale rings for a portion of the day. 1:00 – Large Equip. sells followed by trucks, tillage, etc. You will be pleased that you made the trip to attend this auction.

Owner: Kenneth Lee & Sons, Inc.

Terms: Cash/Check W/ID
Photo ID Required to Register

Managed & Conducted by:
Martin Jurisch & Assoc., P.O. Box 1867, Rapid City, SD 57709
E-mail:  Phone: 605-348-5261 of call Martin Jurisch direct at 605-484-1353   Fax: 605-985-5307
Web Site:

Copyright © 2004 by Martin Jurisch & Assoc.

Please visit our friends at

This page has been viewed 5310 times